Suitable for our SLSC Cards and RTIs we offer various accessories like SET SMARTbrick Modules for the SET Modular Cards 14XX as well as various cables and suitable tools.
To the SLSC Tools
To the SET-SMARTbricks
4x Molex 10-pole female to D-SUB 37-pole female.
1x Molex 10-pole female to D-SUB 25-pole female.
8x Molex 10-pole female to VHDCI 68-pole male.
4x Molex 10-pole female to VHDCI 68-pole male.
VHDCI 68-pole male to VHDCI 68-pole male.
SLSC Rack Breakout PCB was designed for the back of the SLSC chassis and can be used for commissioning or troubleshooting the SLSC system.
DSUB HD44 Breakout PCB fits the J1 and J2 SLSC front panel and can be used for commissioning or troubleshooting the SLSC system.
RTI Strain relief
with 4 screws
Simulates two Type K thermocouples using two millivolt voltage sources galvanically isolated from the remaining test system.
The SMARTbrick 2200A – DUAL SOLID SWITCH/SOURCE module can be used to configure passive and active types.
With the SMARTbrick 2300A – DUAL 24V DIGITAL INPUT module active digital outputs can be tested.
A single-channel current measuring module with galvanic isolation is used to analyse power outputs.
The module measures power outputs and provides the measurement value
Analog current inputs can be tested with this module.
The generator module generates frequencies as either a rectangular or sine wave.
Passive digital outputs can be tested with this module.
Active analog current inputs can be tested with this module.
Two galvanically isolated power inputs measured with 14 bit and 1 Msps.
Emulation of a temperature sensor as an ohmic resistance via control circuit.
First name, Name (required)
E-Mail address (required)