Simulating two Type K thermocouples

Type K sensor simulation simulates two type K thermo-elements using two millivolt power sources which are galvanically isolated from the remaining test system.

A line break can be stimulated individually for each channel for error stimulations. The voltage amplitude, sensor type and the error stimulation are specified in connection with the carrier board via CAN bus. The superordinate test system already takes the temperature of the reference junction into account when specifying the voltage value.

Channels 2
Max. gain error < 1%
Max. offset voltage 200 µV
Cutoff frequency 10 Hz
Output voltage range 0.2 – 60 mV
Max. output voltage 5 mA
Insulation voltage max. 50 V
Insulation resistance 1 MΩ (± 5%)
Error stimulation “line breagage” via software
Error stimulation “short circuit” via the voltage 0mV
Display of error stimulies via LEDs

Additional Products

SET-14XX Modular Cards
SLSC-14XX Modular Cards


You have questions? Our team is always happy to answer your questions: +49 7522 916 87 600
Or just write an E-Mail to