SMARTbrick 2400B – 200mA CURRENT INPUT
For evaluation of current outputs
A single-channel current measuring module with galvanic isolation is used to analyse power outputs. A load resistance of 4.4 Ohm is used for current analysis. A line break can be stimulated for error stimulations.
The error stimulation is specified in connection with the carrier board via CAN bus.
| Channels | 1 |
| Input current | 0 mA up to 200 mA |
| Max. permissible total error | ± 0.3% |
| Insulation voltage | max. 50 VDC |
| Insulation Resistance | > 1 MΩ |
| ADC Resolution | 12 Bit |
| Modulfunctions | |
| Error stimulation “line breakage” | via software |
| Display of error stimulies | via LED’s |
Additional Products
 |
| SLSC-14XX Modular Cards |
Contact
You have questions? Our team is always happy to answer your questions: +49 7522 916 87 600
Or just write an E-Mail to smartbrick.support@smart-e-tech.de.